Ghost II Immobiliser
Guard your vehicle from hacking, key-cloning and car theft. It's silent and inaccessible by a would-be car thief because it doesn't use LED indicators or key-fobs to alert thieves of its presence.
Transport Mode can be temporarily disabled in circumstances such as transporting your vehicle or when your car is being repaired.
Simple change of PIN code
Ghost is a groundbreaking next-generation security device that will secure your vehicle without cutting wires, or adding aftermarket alarm key fobs for immobilisers or alarms. It connects directly with the vehicle's CAN Data Network. A personal PIN code can be programmed using the factory buttons that are located on the dashboard or steering wheel. This code blocks engine start and is undetectable to any RF scanning or code grabbing technologies employed by modern thieves.
The system has an emergency pin code bypass, in case the user forgets his/her code or the programming key becomes inoperative. It also has a Service/Valet Mode which allows the vehicle to be started temporarily and driven without requiring the use of a valid code. This makes it ideal for transportation or for servicing.
The UK automotive aftermarket, though growing, is not free of theft. Thieves can easily bypass most traditional deterrents, like locking your wheels and steering wheel by hacking into the OBD port on your vehicle. This can be done using a laptop, USB cable and an inexpensive OBD scanner that can be purchased on the internet for PS50.
It is essential to secure your vehicle with an immobiliser for Ghost II to prevent theft. It's a small device that can help prevent vehicle theft. Once you have your PIN number, it is easy to use. The device is housed in a small box that can be connected to the wiring harness of your vehicle. It is also weatherproof and can be installed anywhere in your vehicle and is therefore difficult for a thief to find. In addition to this the device is simple to install and comes with a guaranty.
Weatherproof tiny device
The device connects to the CAN data network in your vehicle without cutting cables and operates quietly. It can be programmed with a the unique PIN code that is entered using the buttons on the steering wheel as well as the dashboard to avoid theft. The device has a GPS tracker built in. A number of insurance companies for cars recommend it. It can be activated by an app on your smartphone. It is weatherproof and is able to be hidden in the car and is nearly impossible for thieves to find.
In contrast to traditional systems that can be heard by criminals, ghost II operates in a quiet manner and requires between 4 and 21 presses on the vehicle's buttons. It can be set by the owner of the vehicle according to their preferences, and the sequence cannot be broken. There is a mobile phone app that can be used to deactivate the system. If you're selling your vehicle, there's also a master reset code that can reset the immobiliser's CAN bus.
Modern thieves employ diagnostics to detect circuit breakages on modern vehicles. The Ghost however, does not have any. Therefore, it is an extremely secure and reliable system that can be installed inside vehicles by our experienced team of CANbus immobiliser fitting technicians.
Unlike other CANbus immobilisers that require key fobs for installation, the Ghost is compatible with all types of vehicles. The technology behind it is so advanced that it protects against a range of security threats, including signal relay attacks as well as ECU swapping. It is also compatible with a range of smartphones, and can notify owners if the vehicle is being driven by an unauthorized person.
Tested for each vehicle
Ghost is an innovative immobiliser system that protects your vehicle from key cloning, hacking, and even key theft, unlike anything other product available today. To steal a vehicle that is protected by Ghost the thief must physically remove the device and transport it to an unattended trailer. It also protects against the use of jumper cables, wheel locks, cables, and universal keys.
It is extremely simple to set up and works in complete silence. It connects to your vehicle's CAN data circuit allowing it to communicate directly with your ECU (Engine Control Unit). It is sealed and so small that it can be tucked in the harness of your vehicle and placed anywhere, making it near impossible for a thief to detect.
Once installed, it prevents your vehicle from starting until the unique disarming sequence is activated by pressing the buttons on the steering wheel, door panels or centre console. It can be up to 20 numbers long and lets you choose how secure you want to be. You can also use it to enable the service/valet mode, which allows you to temporarily start your vehicle and drive it without entering your PIN.
Because it uses the CAN data circuit there are no radio frequency signals as the traditional immobiliser relay, this means a thief cannot listen to the relay in order to try and decipher what PIN code is being entered. ghost immobiliser car does not have circuit breaks and cannot be detected by diagnostic tools, RF scanning, or code-grabbing technologies.
At Boundary Car Care we have been proud to be approved installers of this fantastic product for a long time currently and are extremely impressed with how well it performs and the peace of mind it offers our customers. It's a fantastic solution to protect your pride and joy in these uncertain times.
Emergency Pin Code Override
The Ghost immobiliser blocks your vehicle from starting if you don't have the correct PIN code. It is weatherproof and tamper proof. It is hidden within the wiring harness of your vehicle. It makes use of buttons on the steering wheel or dashboard to create an individual code sequence. Contrary to the Thatcham devices, it doesn't rely on LEDs and is connected to your vehicle using the CAN system. This makes it inaccessible to professional thieves who use accessible diagnostic tools that are able to detect alarm/immobiliser circuits within modern vehicles.
Inputting an emergency override on the app on your phone will temporarily disable your Ghost immobiliser. This allows you to lend your car to a valet, or family member without sharing your pin number. It is ideal for situations like maintenance, or when you have to leave your car at valet parking or a garage.
Ghost can be used in conjunction with the driver fob. This lets you start your car using your key or through the app. This is ideal if you want to give your child the keys to the car, or if you are unable to input the pin number in a quick manner.
It's not a surprise that the Ghost immobiliser, with its simple PIN-change procedure, user-friendly interface, and a myriad of safety features, is endorsed by many insurance companies. It is also covered by a security guarantee. Its sleek, compact design and seamless integration into your vehicle's existing systems makes it an essential option for vintage or high-performance automobiles.
Service/Valet mode
The Ghost is an immobiliser which can stop vehicle theft by blocking communication between your key and the ECU - meaning that the engine is unable to be started without entering a unique PIN. It's also hidden in the wiring which makes it difficult to detect. It doesn't use LED indicators that can reveal its position. This is great the time you need to hand over your car to a mechanic, or valet parking. Enter the code supplied by your engineer at the time of installation to activate valet mode. This will allow them to start your vehicle without having to enter an arm-disarm sequence. To exit valet, return your vehicle to normal operation. The code will be changed automatically to the pin you normally use.
Ghost is designed to integrate with the CAN bus system in your car, unlike other aftermarket security products that rely on buttons or key-fobs. This gives it unmatched security against modern methods of theft such as key cloning or hacking.
Once installed your engineer will instruct you on how to arm, disarm and valet-mode your vehicle. All of this can be accomplished through your smartphone app. Your engineer will create your pin, which is easy to remember and mathematically impossible for thieves to guess. However, if you do forget it do not worry as every installation comes with an Emergency PIN Code override that will allow you to return your vehicle to action.
Our installers are highly skilled and have been trained to ensure that your Ghost is installed correctly. All installations are done at the location of the customer. We also offer an explanation of how to use the device as well as a mobile application. Once your Ghost is installed, we guarantee its performance for life.